Welcome to Kd-Mobile

Languages:   ENG    NL    ITA    GM    SPA    FR    CN    CG    AR   



Device Configuration Guides

Sipura 2002

This hard Phone is another ATA ( analog telephone adaptor ). It enables You to connect your POTS ( Plain old telephone System ) Phones to the Internet. Think of it as a Phone Jacks. For VOIP. It has one Ethernet Port And two RJ11 phone jacks. This is one of the most feature Rich and easy to, Use ATA that we Have tested. Out of the Box, it is Configured for DHCP. This means that it gets its IP address from your DHCP server automatically. Fully documentation can be found at:
Sipura's site.

NOTE: We have seen instances where installing the SPA2002 Behind a firewall which blocks ICMP packets causes problems With Registration. Try tuning off any ICMP blocking on your Firewall.

You Must first determine what IP address it Received. To do this, you needs to pick up the Phone Attached to the line 1 jack and

Dial: **** ( Four asterisk ) Then dial: 110 #

And you will be told the IP address of your device ( e.g. )

Go to any browser equipped computer on your network and enter the address: http:///
(where is replaced by the address that was given to you in STEP 1).

Click on the “Admin Login” Button near the top right side of the Screen, then click on “Line 1”tab.

You Need to Modify on a few parameters from the Factory default. They are listed here:

Proxy : sip.kd-mobile.com
Display Name : Enter your Full Name, this will show up as part of your callerid.
User ID : Enter the Phone Number you Chose when you Signed up for kd-mobile.com Service.
Password : Enter the Password that you Chose when you Signed up for kd-mobile Service.
Registration Expires : 3600

Proxy and Registration


Click on the ``Submit All Changes`` Button at the Bottom of the Form.

Change the ´´Preferred Codes`` to G729a. Also change the ´´Use Pref Codec Only`` to No.
You can do this for Both Line 1 and Line 2 ( i.e. if you are going to use Line 2 )

Make calls!!

Quick Links